Brisbane Roof Painting

For decades, home owners have been painting the roofs of their homes in a bid to make them look attractive and last longer. Individuals may hire contract painters or roof restoration companies to paint their roofs. Conversely, they may paint the roof themselves. 

Brisbane roof painting requires that an individual thoroughly prepares for the task. The roof is openly exposed to sun and other harsh weather elements. For this reason, individuals/home owners should only select highly durable paints. In addition, it should be durable.  

The correct paint should be used for Brisbane roof painting. Roof paint should not be confused with exterior paints commonly used on surfaces such as walls. Two factors may help home owners differentiate roof paint from ordinary exterior paint. One is the percentage of the solids. Unlike exterior paints which comprise 30% solids, roof paints comprise 50%. The high percentage of solids help make the roof paints more durable. Another factor is the elasticity of the paint. Elastic paints are known to last longer. Roof paints have a high elasticity are therefore less likely to peel, flake or crack. 

The first step in Brisbane roof painting is the cleaning of the roof. For this task, a pressure cleaner is required. Where the roof was previously painted and the paint has peeled, it should be stripped off completely.  Roof repair is the second step in Brisbane roof painting. Different roofs are repaired in different ways. For example, tiled roof repair involves replacing any broken tiles and also re-pointing the ridge caps. On the other hand, repair on metal roofs entails removing rust and also replacing loose screws and nails. 

The third step in Brisbane roof painting involves priming the surface. Again different roof types warrant different types of primer. While concrete tile primer and sealer is used on a tiled roofs, etch primer is used on a metal roof.  For good Brisbane roof painting results, individuals are advised to apply not less than two coats of paint. Ideally, the second coat should be applied eight to 12 hours after the first. The second coat ought to be applied perpendicularly to the first as this helps to ensure no thin areas.